I had a user grade Enders razor and was wondering how it was attached to the handle. Then, my need to know took over. I got out my Dremel and separated the handle from the head.
![[Image: IMG_0182.JPG]](https://3.bp.blogspot.com/-KR5xgVZemQE/XLZY5L27ctI/AAAAAAACFJg/tqaVDrzTGn0GO-i6JrsJ8hLw95bBa9BMQCLcBGAs/s1600/IMG_0182.JPG)
I then got busy and fashioned a handle from some walnut I had on hand. Here it is dry fitted to the head.
![[Image: IMG_0184.JPG]](https://1.bp.blogspot.com/-ZdOnvL4JePg/XLZY5F1OxdI/AAAAAAACFJk/uaRqGw0R6zYJGw9O4FOIZzIhm76y_byRQCLcBGAs/s1600/IMG_0184.JPG)
I carved some grips on the sides. Then I put a coat of polycrylic on the handle. This is before the polycrylic.
![[Image: IMG_0189.JPG]](https://3.bp.blogspot.com/-q-YyOO-IOVY/XLZa_ol3CaI/AAAAAAACFKc/JBE5uTAt_8UvUl6NxP0YF-vg1_Ce3Gn1QCLcBGAs/s1600/IMG_0189.JPG)
After two coats of polycrylic: dry fitting.
![[Image: IMG_0194.JPG]](https://4.bp.blogspot.com/-hmR3-YEDiCs/XLZrmPMR41I/AAAAAAACFK0/Tmuz9rZVSTMOH7KNYeqIbyX3g3V-vOUkwCLcBGAs/s1600/IMG_0194.JPG)
I attached the handle to the head with epoxy.
![[Image: IMG_0196.JPG]](https://1.bp.blogspot.com/-B5FT7lgsVT4/XLZvV1ulFEI/AAAAAAACFLQ/UY3VuxXTSXo4W-d8Cj1MzgyQAkjt755rwCLcBGAs/s1600/IMG_0196.JPG)
I then got busy and fashioned a handle from some walnut I had on hand. Here it is dry fitted to the head.
I carved some grips on the sides. Then I put a coat of polycrylic on the handle. This is before the polycrylic.
After two coats of polycrylic: dry fitting.
I attached the handle to the head with epoxy.
Jim - The Cackalacky Kid "Finally, shaving is fun again..."
The Jayaruh Brushes - The Clan of Catchers
The Jayaruh Brushes - The Clan of Catchers