Old Type SHaDE - Printable Version

Old Type SHaDE - Printable Version

+- tost3 (https://www.tost3.com)
+-- Forum: Razors (https://www.tost3.com/forumdisplay.php?fid=6)
+--- Forum: Non vintage SE and SHaDE razors. (https://www.tost3.com/forumdisplay.php?fid=51)
+--- Thread: Old Type SHaDE (/showthread.php?tid=257)

Pages: 1 2

Old Type SHaDE - mayer57619 - 11-30-2020

I had an extra Old Type head lying around and a while back I decided to turn it into a SHaDE. Here are some pictures of what I came up with.

Filename: IMG_30112020_091846_(1400_x_781_pixel).jpg Size: 239.95 KB 11-30-2020, 03:20 PM

Filename: IMG_30112020_091902_(1400_x_1050_pixel).jpg Size: 298.06 KB 11-30-2020, 03:20 PM

Filename: IMG_30112020_091914_(1400_x_1050_pixel).jpg Size: 192.59 KB 11-30-2020, 03:21 PM

Filename: IMG_30112020_091927_(1400_x_1050_pixel).jpg Size: 224.66 KB 11-30-2020, 03:21 PM

RE: Old Type SHaDE - Jayaruh - 12-01-2020

Very Cool.
I did the same with a Russian OC razor. It makes a great SE razor.
[Image: IMG_1542.JPG]

RE: Old Type SHaDE - Wchnu - 12-05-2020

Awesome. I have the FuzzTech from across the street. It’s an unmentionable turned into a shade. Not OC though. It has been fun to play with.

PS. I am holding of pulling the pin on a few things in this thread

RE: Old Type SHaDE - Dave in KY - 03-21-2021

Practiced on a junkie condition Tech to experiment before doing with a better specimen.

Filename: IMG_20210320_170448216.jpg Size: 353.5 KB 03-21-2021, 11:27 PM

RE: Old Type SHaDE - GAW9576 - 03-22-2021

I believe it is Single edge Half a DE. But I might be slightly off. Or at least I have been told I'm slightly off.

RE: Old Type SHaDE - Jayaruh - 03-22-2021

(03-21-2021, 11:28 PM)Dave in KY Wrote: Practiced on a junkie condition Tech to experiment before doing with a better specimen. What does SHaDE stand for? Acronym?

Good job, Dave.

RE: Old Type SHaDE - Dave in KY - 03-22-2021

(03-22-2021, 12:29 AM)GAW9576 Wrote: I believe it is Single edge Half a DE. But I might be slightly off. Or at least I have been told I'm slightly off.

Thanks Greg

(03-22-2021, 12:48 AM)Jayaruh Wrote:
(03-21-2021, 11:28 PM)Dave in KY Wrote: Practiced on a junkie condition Tech to experiment before doing with a better specimen. What does SHaDE stand for? Acronym?

Good job, Dave.

Thanks Jim, wish it was in better shape but a good practice one.

RE: Old Type SHaDE - GAW9576 - 03-23-2021

(03-22-2021, 12:58 AM)Dave in KY Wrote:
(03-22-2021, 12:29 AM)GAW9576 Wrote: I believe it is Single edge Half a DE. But I might be slightly off. Or at least I have been told I'm slightly off.
Thanks Greg

(03-22-2021, 12:48 AM)Jayaruh Wrote: Good job, Dave.

Thanks Jim, wish it was in better shape but a good practice one.

I had an unmentionable similar to what that started life as in simular shape. I sanded the top till it was smooth with progressively finer grit sandpaper then polished it to a near mirror finish. You could do the same with that one.

RE: Old Type SHaDE - Jayaruh - 03-23-2021

I made a video to show off mine.

RE: Old Type SHaDE - Wchnu - 03-23-2021

I have a few OC unmentionables. I might try to build one of these. Or get it to someone that can build it fir me.