Schick Injectors for Dummies

[CDinVT]

I made a prototype out of soft pine just to test the waters. It is with the original handle design off my e2's dimensions but with simple horizonal and vertical cut checkering that I did by eye and a very sharp mora knife it looks like dung. I should have laid the line 1/16th apart with a ruler. I sanded it with 60 , 150 grit  then stained with minwax gunstock stain and 2 coats of oil based gloss poly. With the walnut I'm going with the e2's dimensions, smooth with no bevel cuts just the sharp edges taken off no stain sanded to 220 grit not sure about finish yet .With gunstocks I normally do multiple coats boiled linseed oil with a last 2 coat of Danish oil .The prototype will make a nice key Ring fob