Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
3D Print SE razor
#11
Here's my finished design of the 3d printed lather catcher with storage case.

This SE safety razor design was inspired by the "Stoll Chrome Steel Lather Catcher" made by The Wilbert Cutlery Co. in Chicago IL, in the early 1900s. The razor uses the more readily available GEM blades. With the addition of a baton handle, this razor is appropriately named "Stoll Jr.". The razor is very easy to maneuver, and the unique floating edge design provides excellent feedback.

This razor is very easy to print, and once assembled, it is a one-piece razor with no moving parts. The only post-processing should be the removal of the included support on the razor-head and gluing the head and handle together with CA glue, or similar. Additional supports are NOT needed.

How to install blade:
Hold the blade from sides with thumb and index finger and edge pointing away from hand. With the same grip, insert the spine of the blade through the front of the razor-head between the cap and the comb and slide into the back slot. Inspect that the blade is properly centered and that the spine is making full contact in the back slot. The cap should have good tension on the blade, and the cap's index tab should be properly seated in the blade's center slot. DO NOT INSTALL, OR REMOVE BLADE FROM THE SIDES.

How to print storage case with different color letters:
Step 1) Open file "Stoll_Jr_Case_Letters.stl" into slicer of choice. Center object if it doesn't automatically center when loaded. Set the first layer height to 0.2mm and slice and print with your filament color of choice. When the print is finished, DO NOT remove it from the build platform.

Step 2) Open file "Stoll_Jr_Case_Main.stl" into slicer of choice. Center object if it doesn't automatically center when loaded. Set the first layer height to 0.2mm and slice and print using a different color filament. This file will print around and on top of the letters from the first printed file and will combine the two-color objects on the same layer. The case is a print-in-place design and may require some flexing at the hinges to break away any layers that may have fused during printing.

The files are now available on Thingiverse.

GEM Single Edge Safety Razor "Stoll Jr. SE" Lather Catcher with Case by rogerquin - Thingiverse

or

https://www.thingiverse.com/rogerquin/designs

   
   
   
   
   
The following 8 users Like SlimGem's post:
  • cpool222 (07-11-2021), Dave in KY (05-08-2021), GAW9576 (05-09-2021), Grassy (05-08-2021), ischiapp (05-09-2021), mlb 549 (05-08-2021), riverrun (05-08-2021), twhite (07-16-2021)
Like Reply
#12
Looks slick, nice work !
Viewer # 7  Musketeer #1 
The following 2 users Like Dave in KY's post:
  • GAW9576 (05-09-2021), SlimGem (05-08-2021)
Like Reply
#13
That's and absolutely fantastic looking razor. And the box looks quite nice as well.
The following 1 user Likes GAW9576's post:
  • SlimGem (05-10-2021)
Like Reply
#14
And, it is a great shaver, too.
[Image: IMG_3876.JPG]
Jim - The Cackalacky Kid "Finally, shaving is fun again..." 
The Jayaruh Brushes  - The Clan of Catchers
The following 7 users Like Jayaruh's post:
  • cpool222 (07-11-2021), GAW9576 (05-12-2021), riverrun (05-11-2021), SlimGem (05-10-2021), TobyC (07-14-2021), twhite (07-16-2021), Wchnu (05-12-2021)
Like Reply
#15
Sorry that I'm so ignorant about this, but I found out that our local library has a 3D printer, and I'm really interested in the clear TNNSER.  What would I need to get them to print it?  Thanks,
Cleave
The following 2 users Like cpool222's post:
  • GAW9576 (07-14-2021), TobyC (07-14-2021)
Like Reply
#16
(07-14-2021, 03:45 AM)cpool222 Wrote: Sorry that I'm so ignorant about this, but I found out that our local library has a 3D printer, and I'm really interested in the clear TNNSER.  What would I need to get them to print it?  Thanks,
Cleave

To have a TNNSER printed you go to https://www.thingiverse.com/thing:3875898 and download 3 files for the base, the cap and the handle. Using those you can print a TNNSER.
To have it printed in clear resin your library would need a special printer that can print in that material. 
Which is unlikely. Doesn't hurt to ask though.
sɐǝɹpu∀ — https://razors.click
The following 5 users Like riverrun's post:
  • cpool222 (07-19-2021), GAW9576 (07-14-2021), SlimGem (07-16-2021), TobyC (07-14-2021), twhite (07-16-2021)
Like Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)